1-15
Operation Command Remarks
quit
In system
view
dot1x port-method { macbased |
portbased } [ interface
interface-list ]
interface interface-type
interface-number
dot1x port-method { macbased |
portbased }
Set port
access
method
for
specified
ports
In port
view
quit
Optional
The default port access method is
MAC-address-based (that is, the
macbased keyword is used by
default).
Set authentication
method for 802.1x
users
dot1x authentication-method
{ chap | pap | eap }
Optional
By default, a switch performs CHAP
authentication in EAP terminating
mode.
Enable online user
handshaking
dot1x handshake enable
Optional
By default, online user handshaking
is enabled.
Enter Ethernet port
view
interface interface-type
interface-number
—
Enable the
handshaking packet
secure function
dot1x handshake secure
Optional
By default, the handshaking secure
function is disabled.
To Next Page
Loading...
Need help?
General