To Next Page

To Previous Page

1-25

# Create a RADIUS scheme named “radius1” and enter RADIUS scheme view.

[Sysname] radius scheme radius1

# Assign IP addresses to the primary authentication and accounting RADIUS servers.

[Sysname-radius-radius1] primary authentication 10.11.1.1

[Sysname-radius-radius1] primary accounting 10.11.1.2

# Assign IP addresses to the secondary authentication and accounting RADIUS server.

[Sysname-radius-radius1] secondary authentication 10.11.1.2

[Sysname-radius-radius1] secondary accounting 10.11.1.1

# Set the password for the switch and the authentication RADIUS servers to exchange messages.

[Sysname-radius-radius1] key authentication name

# Set the password for the switch and the accounting RADIUS servers to exchange messages.

[Sysname-radius-radius1] key accounting money

# Set the interval and the number of the retries for the switch to send packets to the RADIUS servers.

[Sysname-radius-radius1] timer 5

[Sysname-radius-radius1] retry 5

# Set the timer for the switch to send real-time accounting packets to the RADIUS servers.

[Sysname-radius-radius1] timer realtime-accounting 15

# Configure to send the user name to the RADIUS server with the domain name truncated.

[Sysname-radius-radius1] user-name-format without-domain

[Sysname-radius-radius1] quit

# Create the domain named “aabbcc.net” and enter its view.

[Sysname] domain enable aabbcc.net

# Specify to adopt radius1 as the RADIUS scheme of the user domain. If RADIUS server is invalid,

specify to adopt the local authentication scheme.

[Sysname-isp-aabbcc.net] scheme radius-scheme radius1 local

# Specify the maximum number of users the user domain can accommodate to 30.

[Sysname-isp-aabbcc.net] access-limit enable 30

# Enable the idle disconnecting function and set the related parameters.

[Sysname-isp-aabbcc.net] idle-cut enable 20 2000

[Sysname-isp-aabbcc.net] quit

# Set the default user domain to be “aabbcc.net”.

[Sysname] domain default enable aabbcc.net

# Create a local access user account.

[Sysname] local-user localuser

[Sysname-luser-localuser] service-type lan-access

[Sysname-luser-localuser] password simple localpass

H3C S3100 Series User Manual

Other manuals for H3C S3100 Series