EasyManuals Logo

H3C S3100 Series User Manual

H3C S3100 Series
1057 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #458 background imageLoading...
Page #458 background image
1-3
Operation Command Remarks
Set the user
name in fixed
mode for MAC
authentication
mac-authentication
authmode usernamefixed
Configure the
user name
mac-authentication
authusername username
Set the user name in
fixed mode for MAC
authentication
Configure the
password
mac-authentication
authpassword password
Optional
By default, the user name
is “mac” and no password
is configured.
Specify an ISP
domain for MAC
authentication
mac-authentication domain isp-name
Required
By default, no ISP domain
is specified and the default
domain is used.
Configure the MAC
authentication timers
mac-authentication timer { offline-detect
offline-detect-value | quiet quiet-value |
server-timeout server-timeout-value }
Optional
The default timeout values
are as follows:
300 seconds for offline
detect timer;
60 seconds for quiet timer;
and
100 seconds for server
timeout timer
Enter Ethernet
interface view
interface interface-type interface-number
Set the offline detect
timer for MAC
authentication on the
Ethernet port view
mac-authentication timer offline-detect
offline-detect-value
Optional
300 seconds for offline
detect timer by default
z If MAC authentication is enabled on a port, you cannot configure the maximum number of dynamic
MAC address entries for that port (through the mac-address max-mac-count command), and
vice versa.
z If MAC authentication is enabled on a port, you cannot configure port security (through the
port-security enable command) on that port, and vice versa.
z You can configure MAC authentication on a port before enabling it globally. However, the
configuration will not take effect unless MAC authentication is enabled globally.
z The offline detect timer configured in system view applies to all MAC authentication-enabled ports.
z The offline detect timer configured in Ethernet port view applies to the current port only. You can
set the offline detect timer to different values on different Ethernet ports.
z The offline detect timer configured in Ethernet port view takes precedence over the one configured
in system view.

Table of Contents

Other manuals for H3C S3100 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C S3100 Series and is the answer not in the manual?

H3C S3100 Series Specifications

General IconGeneral
BrandH3C
ModelS3100 Series
CategorySwitch
LanguageEnglish

Related product manuals