H3C S3100 Series

1-6
# Set the MAC authentication timers.
[Switch] mac-authentication timer offline-detect 180
[Switch] mac-authentication timer quiet 180
# Specify the MAC authentication username format as MAC address, that is, using the MAC address
(with hyphens) of a user as the username and password for MAC authentication of the user.
[Switch] mac-authentication user-name-format mac-address with-hyphen
# Enable MAC authentication on Ethernet 1/0/1, and specify VLAN 2 as the Auth-Fail VLAN
[Switch–Ethernet1/0/1] mac-authentication
[Switch–Ethernet1/0/1] mac-authentication guest-vlan 2
[Switch–Ethernet1/0/1] quit
6) Configure 802.1X authentication
# Enable 802.1X authentication globally.
[Switch] dot1x
# Enable 802.1X authentication (MAC-based access control required) on Ethernet 1/0/1, and specify
VLAN 2 as the Auth-Fail VLAN.
[Switch] interface ethernet1/0/1
[Switch-Ethernet1/0/1] dot1x
[Switch-Ethernet1/0/1] dot1x port-method macbased
[Switch-Ethernet1/0/1] dot1x auth-fail vlan 2
7) Configure Web authentication and related parameters.
# Enable Web authentication globally.
[Switch] web-authentication web-server ip 100.1.1.1 port 8080
[Switch] web-authentication enable
# Enable Web authentication on Ethernet1/0/1, and set it to use VLAN 5 as its Auth-Fail VLAN.
[Switch-Ethernet1/0/1] web-authentication select method extended
[Switch-Ethernet1/0/1] web-authentication auth-fail vlan 5