H3C S3100 Series User Manual

1-4
Table 1-3 Configure basic SNMP functions (SNMPv3)
Operation Command Description
Enter system view
system-view
—
Enable SNMP agent
snmp-agent
Optional
Disabled by default.
You can enable SNMP agent by
executing this command or any of the
commands used to configure SNMP
agent.
Set system information
and specify to enable
SNMPv3 on the switch
snmp-agent sys-info { contact
sys-contact | location
sys-location | version { { v1 |
v2c | v3 }* | all } }
Required
By default, the contact information for
system maintenance is "R&D
Hangzhou, H3C Technology Co.,
Ltd.", the system location is
"Hangzhou China", and the SNMP
version is SNMPv3.
Set an SNMP group
snmp-agent group v3
group-name [ authentication |
privacy ] [ read-view
read-view ] [ write-view
write-view ] [ notify-view
notify-view ] [ acl acl-number ]
Required
Encrypt a plain-text
password to generate a
cipher-text one
snmp-agent
calculate-password
plain-password mode { md5 |
sha } { local-engineid |
specified-engineid engineid }
Optional
This command is used if password in
cipher-text is needed for adding a
new user.
Add a user to an SNMP
group
snmp-agent usm-user v3
user-name group-name
[ cipher ] authentication-mode
{ md5 | sha } auth-password
[ privacy-mode { des56 |
aes128 } priv-password ] ] [ acl
acl-number ]
Required
Set the maximum size of
an SNMP packet for
SNMP agent to receive
or send
snmp-agent packet max-size
byte-count
Optional
1,500 bytes by default.
Set the device engine ID
snmp-agent local-engineid
engineid
Optional
By default, the device engine ID is
“enterprise number + device
information”.
Create or update the
view information
snmp-agent mib-view
{ included | excluded }
view-name oid-tree [ mask
mask-value ]
Optional
By default, the view name is
“ViewDefault” and OID is 1.

H3C S3100 Series Specifications

General

Brand	H3C
Model	S3100 Series
Category	Switch
Language	English