To Next Page

To Previous Page

1-40

# Import the client public key pair named Switch001 from the file Switch001.

[SwitchB] public-key peer Switch001 import sshkey Switch001

# Assign the public key Switch001 to user client001.

[SwitchB] ssh user client001 assign publickey Switch001

z Configure Switch A

# Create a VLAN interface on the switch and assign an IP address, which serves as the SSH client’s

address in an SSH connection.

<SwitchA> system-view

[SwitchA] interface vlan-interface 1

[SwitchA-Vlan-interface1] ip address 10.165.87.137 255.255.255.0

[SwitchA-Vlan-interface1] quit

# Generate a DSA key pair

[SwitchA] public-key local create dsa

# Export the generated DSA key pair to a file named Switch001.

[SwitchA] public-key local export dsa ssh2 Switch001

After the key pair is generated, you need to upload the pubic key file to the server through FTP or TFTP

and complete the server end configuration before you continue to configure the client.

# Establish an SSH connection to the server 10.165.87.136.

[SwitchA] ssh2 10.165.87.136 identity-key dsa

Username: client001

Trying 10.165.87.136 ...

Press CTRL+K to abort

Connected to 10.165.87.136 ...

The Server is not authenticated. Do you continue to access it?(Y/N):y

Do you want to save the server's public key?(Y/N):n

**************************************************************************

* Without the owner's prior written consent, *

* no decompiling or reverse-engineering shall be allowed. *

**************************************************************************

H3C S3100 Series User Manual

Other manuals for H3C S3100 Series