1-13
To do… Use the command… Remarks
Configure advantage factor for a
jitter voice test
adv-factor
adv-number
By default, the advantage factor is
zero.
Start the test
test-enable
Required
Display test results
display hwping results
[ admin-name
operation-tag ]
Required
You can execute the command in
any view.
6) Configuring SNMP test on HWPing client
Follow these steps to configure SNMP test on HWPing client:
To do… Use the command… Remarks
Enter system view
system-view
—
Enable the HWPing client function
hwping-agent enable
Required
By default, the HWPing client
function is disabled.
Create an HWPing test group and
enter its view
hwping
administrator-name
operation-tag
Required
By default, no test group is
configured.
Configure the test type
test-type
snmpquery
Required
By default, the test type is ICMP.
Configure the destination IP
address
destination-ip
ip-address
Required
By default, no destination address
is configured.
Configure the source IP address
source-ip
ip-address
Optional
By default, no source IP address is
configured.
Configure the source port
source-port
port-number
Optional
By default, no source port is
configured.
Configure the number of probes
per test
count
times
Optional
By default, each test makes one
probe.
Configure a test description
description
string
Optional
By default, no description
information is configured.
Configure the maximum number of
history records that can be saved
history-records
number
Optional
By default, the maximum number is
50.
Enable history record
history-record enable
Optional
By default, history record is not
enabled.
Configure the retaining time of
history record
history keep-time
keep-time
Optional
By default, the retaining time of
history record is 120 minutes.
Configure statistics interval and the
maximum number of retained
statistics information
statistics
{
interval
interval |
max-group
number }
Optional
By default, statistics interval is 120
minutes and up to two pieces of
statistics information can be
retained.
To Next Page
Loading...
Need help?
General