1-29
# Enable IPv6 filtering on Ethernet 1/0/2, Ethernet 1/0/3, and Ethernet 1/0/4 to filter packets based on
the source IP addresses/MAC addresses.
[SwitchB] interface Ethernet1/0/2
[SwitchB-Ethernet1/0/2] ipv6 check source ip-address mac-address
[SwitchB-Ethernet1/0/2] quit
[SwitchB] interface Ethernet1/0/3
[SwitchB-Ethernet1/0/3] ipv6 check source ip-address mac-address
[SwitchB-Ethernet1/0/3] quit
[SwitchB] interface Ethernet1/0/4
[SwitchB-Ethernet1/0/4] ipv6 check source ip-address mac-address
[SwitchB-Ethernet1/0/4] quit
# Create IPv6 static binding entries on Ethernet 1/0/3 of the Switch B.
[SwitchB] interface Ethernet1/0/3
[SwitchB-Ethernet1/0/3] ipv6 source static binding ip-address 2001::1 mac-address 000
1-0203-0406
To Next Page
Loading...
Need help?
General