Hammond SKX - Pipe Voice Cutoff

Drawbars & Percussion
91
From the previous screen, touch the PAGE RIGHT Touch Button once. The legend below the word “CUTOFF”
should now be blinking.
Pipe Voice Cutoff
This Advanced Feature allows you to set the brightness of each individual Pipe Voice by setting its Filter Cutoff point.
Select the Cutoff setting you want by doing the following:
Turn the VALUE Rotary Control to the right to make the selected Pipe Voice mellower.
Turn the VALUE Rotary Control to the left to make the pitch selected Pipe Voice brighter.
HA<O> SKX Owner’s Playing Guide