Overdrive & Multi-Effects
211
Drawbar Effects - Chorus
“Chorus” refers to a shimmering, non-periodic enhancement of the sound. It is intended to be similar to several
instruments sounding in unison, and is helpful when a thicker tonal texture is desired.
NOTE: Do not confuse this Chorus with the Hammond Vibrato/Chorus effect. The Chorus Advanced Feature,
as mentioned, is non-periodic or “random” sounding. With the Vibrato Chorus, a “cycle” is clearly audible. The
parameters described below DO NOT affect the Vibrato Chorus.
From the previous screen, touch the PAGE LEFT Touch Button repeatedly until the words, “EFFECT TYPE”
appear on the top line of the display. If “Chorus” does not appear on the bottom line, turn the VALUE Rotary
Control until the Information Center Display looks like this
The word “Chorus” should be blinking.
From the above screen, touch the PAGE RIGHT Touch Button once. The Information Center Display should now
look like this:
The number underneath the word “RATE” should be blinking.
You can now select the characteristics for the Chorus.
RATE - Chorus Rate
This Advanced Feature allows you to adjust the rate of the Chorus effect. You can select from “0" (slowest
rate) through “127" (fastest rate).
Turn either the VALUE or the DRAWBAR EFFECT Rotary Control to the right to make the rate faster.
Turn either the VALUE or the DRAWBAR EFFECT Rotary Control to the left to make the rate slower.
HA<O> SKX Owner’s Playing Guide
To Next Page
Loading...
Need help?
General
