Patches & Favorites
162
2. From the above display, turn the VALUE Rotary Control to the right. You will see the numbers increase
and the Patch Name change:
If you turn the VALUE Rotary Control to the left, you will see the numbers decrease until “U001” is reached.
In this way you can quickly preview or change Patch settings.
Ë Creating Your Own Patches
You can program the Patches with your own settings.
TRY THIS:
1 Set up a registration. For this example, use Drawbars, Voices or both together.
2. Touch the RECORD Touch Button. The Information Center Display should look similar to this:
3. Now touch the ENTER Touch Button. The lower line of the Information Center Display will briefly
show:
Recording Patch...
When the above message disappears, the Recording process is complete.
NOTE: As explained on page 1, Preset Patches (those with a “P” in front of the number) cannot be
changed. Therefore, when creating or editing Patches, make sure the Patch number is prefaced by a “U”
for User Patch.
HA<O> SKX Owner’s Playing Guide
To Next Page
Loading...
Need help?
General
