Drawbars & Percussion
68
If you followed the instructions on the previous page, you should now see Page 1 of the CUSTOM TONE WHEEL
Edit Menu. The legend underneath the word “TONEWHEEL” should now be blinking.
CUSTOM TONE WHEEL Edit Menu - Voicing Type
Use the VALUE Rotary Control to select “Btyp1,” “Btype2" or “Mellow.”
4. After you have made your selection, touch the PAGE UP Touch Button to access the choices for the
selected Drawbar Voicing Type:
CUSTOM TONE WHEEL Edit Menu - Voicing Presets
There are four choices available for “Btype1" and “Btype2:"
“Real B-3" - Replicates a B-3 in good condition. Contains moderate motor hum and leakage noise.
“80's Clean” - Based upon a very “clean”-sounding B-3. The motor hum or leakage noise has been removed,
the “vibration” caused by the wow-flutter of the motor remains.
“Noisy” - Similar to “Real B-3, but with more motor hum and leakage noise.
“Noisy 60" - Similar to “Noisy,” but with more leakage noise.
There are also four choices of sound for the “Mellow” setting:
“Full Flats” - Pure sine waves, with all frequencies sounding at the same volume.
“Husky” - Pure sine waves, but with a slight bass and mid-frequency boost.
“Flute Lead” -Pure sine waves, but with reduced bass and treble, the opposite of “Husky”.
“Cheap Tr.s” -Reduced bass response, producing a sound similar to low-grade AM radio.
HA<O> SKX Owner’s Playing Guide
To Next Page
Loading...
Need help?
General
