Overdrive & Multi-Effects
196
From the previous screen, touch the PAGE RIGHT Touch Button once. The Information Center Display should
now look like this:
The legend underneath the word “WAVE” should be blinking.
WAVE - Wah-Wah Waveform
This Advanced Feature allows you to select which waveform will be used to modulate the Wah-Wah effect. The data
chart below shows the options you may select.
Drawbar Wah-Wah Wave Options
Description Function
TRI Triangle wave, which will change the sound smoothly from high to low to high.
SQR Square wave, which will cause the filter to rise and fall suddenly.
SAW Ascending Sawtooth wave, which will cause the filter to rise suddenly and fall gradually.
S&H Sample & Hold, which will cause the filter to rise and fall randomly.
NOTE: The SOURCE must be set to “LFO” in order for this Advanced Feature to function. See page 13
for information on how to select the SOURCE.
Turn the VALUE Rotary Control to make your selection.
HA<O> SKX Owner’s Playing Guide
To Next Page
Loading...
Need help?
General
