Overdrive & Multi-Effects
225
Extra Voice Effects - Tremolo
If you followed the above instructions, the Information Center display should look like this. If it does not, turn the
VALUE Rotary Control until the word “Tremolo” appears on the bottom line of the display.
The word “Tremolo” should be blinking.
From the previous screen, touch the PAGE RIGHT Touch Button once. The Information Center Display should
now look like this:
The legend underneath the word “WAVE” should be blinking.
You can now select the characteristics for the Tremolo.
WAVE - Tremolo Waveform
This Advanced Feature allows you to select which waveform will be used to modulate the volume. The data chart
below shows the options you may select.
Extra Voice Tremolo Wave Options
Description Function
TRI Triangle wave, which will change the volume smoothly from loud to soft to loud.
SQR Square wave, which will cause the volume to rise and fall suddenly.
SAW Ascending Sawtooth wave, which will cause the volume to rise suddenly and fall gradually.
S&H Sample & Hold, which will cause the volume to rise and fall randomly.
DSQR Dull Square wave - similar to SQR, but with a smoother rising and falling of the volume.
Turn the VALUE Rotary Control to make your selection.
HA<O> SKX Owner’s Playing Guide
To Next Page
Loading...
Need help?
General
