Overdrive & Multi-Effects
237
Extra Voice Effects - Phaser
“Phaser” will create the effect of splitting an audio signal into two paths and varying their phase relationship to each
other, resulting in an alternately hollow and full-bodied sound. It can be described as a “swooshing” or “twisting”
effect.
From the previous screen, touch the PAGE LEFT Touch Button repeatedly until the words, “EFFECT TYPE”
appear on the top line of the display. If “Phaser” does not appear on the bottom line, turn the VALUE Rotary
Control until the Information Center Display looks like this
The word “Phaser” should be blinking.
From the above screen, touch the PAGE RIGHT Touch Button once. The Information Center Display should now
look like this:
The numbers underneath the word “RATE” should be blinking.
You can now select the characteristics for the Phaser effect.
RATE - Phaser Rate
This Advanced Feature allows you to adjust the rate at which the sound moves in and out of phase. You can select
from “0" (slowest rate) through “127" (fastest rate).
Turn the VALUE Rotary Control to the right to make the rate faster.
Turn the VALUE Rotary Control to the left to make the rate slower.
HA<O> SKX Owner’s Playing Guide
To Next Page
Loading...
Need help?
General
