Special Performance Features
288
From the previous screen, touch the PAGE RIGHT Touch Button once. The Information Center Display should
now look like this:
The legend underneath the word “RATE” should be blinking.
AMP - Glide Amplitude
This Advanced Feature Menu Page allows you to add a change in volume or Amplitude to the Glide effect. The data
chart below shows the options you may select.
GLIDE AMPLITUDE Options
Description Function
ON When the Glide effect is used, the volume will gradually decrease until no sound is
heard at the completion of the pitch excursion.
OFF The Glide effect works normally - there is no change in volume.
Turn the VALUE Rotary Control to make your selection.
From the previous screen, touch the PAGE RIGHT Touch Button once. The Information Center Display should
now look like this:
The word underneath the word “DRB” should be blinking.
AMP - Glide ON/OFF
This Advanced Feature Menu Page allows you to select which portions of the instrument you want the Glide to affect.
You can enable the Glide effect separately for Drawbars, Extra Voice 1 and Extra Voice 2.
Use the PAGE LEFT and PAGE RIGHT Select Touch Buttons to move back and forth among “DRB,”
“EXV1,” and “EXV2.”.
Turn the VALUE Rotary Control to make your selection.
HA<O> SKX Owner’s Playing Guide
To Next Page
Loading...
Need help?
General
