Drawbars & Percussion
30
Drawbars are divided into 3 groups of sound as well as 3 groups of color. We will first look at the 3 sound groups.
Sound Groups
You may think of these sound groups in terms of the three levels - The Sub being the deep pitches, the Foundation being
the mid range of pitches and the Brilliance being the high pitches.
- SUB - - FOUNDATION - - BRILLIANCE -
TRY THIS:
1. Make sure all Drawbars are “IN” (off).
2. Hold down a “C” chord, starting with “E” above middle “C”, (“E”, “G” & “C” notes) with your right
hand on the manual (or the Upper Manual of the SK-2).
3. Starting with the first white Drawbar, pull out and push in each of the Foundation Drawbars one group
at a time until you have a sound that you like.
4. While still holding the “C” chord down, pull each of the brown Sub Drawbars out until you like the
sound.
5. Now do the same with the Brilliance Drawbars.
It's that easy to create your own custom Drawbar settings.
HA<O> SKX Owner’s Playing Guide
To Next Page
Loading...
Need help?
General
