Special Performance Features
271
SPECIAL PERFORMANCE FEATURES
Ë REVERB
You can add Reverberation or “ambience” to the Drawbars and Extra Voices, and control the amount and type of
Reverb.
REVERB Controls
The REVERB Controls are located on the extreme right side on the Control Panel.
REVERB Touch Tab
Touching this Touch Tab “ON” (red LED lit) will turn on the Reverb effect.
REVERB Rotary Control
This control allows you to adjust the Depth, or amount, of the Reverb effect.
The length and type of REVERB are determined by the settings in the REVERB Edit Menu,
which is explained below.
REVERB Edit Menu
This Advanced Feature Menu allows you to select how the REVERB performs.
Accessing the REVERB Edit Menu using the MENU/EXIT Touch Button:
1. From the PLAY Screen, touch the MENU/EXIT Touch Button to see the first screen of the MENU
Mode. You will see “A" displayed in the extreme upper left corner of the Information Center Display.
2. Touch the PAGE UP Touch Button twice. You will now see the letter “C” displayed in the upper left
corner of the display, and the legend “OD/EX” will be blinking.
3. Touch the PAGE RIGHT Touch Button twice. The word “REVERB” will be blinking.
4. Touch the ENTER Touch Button.
Accessing the REVERB Edit Menu using the Shortcut:
Touch and hold the REVERB Touch Tab. After approximately 1 second, the first page of the REVERB Edit
Menu will display.
You are now in the REVERB Edit Menu. You may now use the PAGE NAVIGATION Touch Buttons in conjunction
with the VALUE Rotary Control to make various changes to the Reverb. This is explained starting below.
REVERB Edit Menu - Page 1
If you followed the instructions on the previous page, you should now see Page 1 of the REVERB Edit Menu. Now
touch the PAGE LEFT Touch Button once so that the number underneath the word “DEPTH” will blink.
HA<O> SKX Owner’s Playing Guide
To Next Page
Loading...
Need help?
General
