Using the USB Port
360
Clearing the entire Voice Library memory from the SKX:
Occasionally, you may want to clear the contents of the Voice Library memory entirely and start over with a “clean
slate.” This Advanced Feature allows you to erase the entire contents of the Voice Library memory except for the
factory-installed voices.
To clear the Voice Library memory, do the following:
1. If you are not in the LIBRARY Edit Menu, follow the instructions on pages 6 and 7 to display it.
Otherwise, continue reading. The Information Center Display should look similar to this:
2. Touch the PAGE RIGHT Touch Button two times. The Information Center Display should now
look similar to this:
3. Touch the ENTER Touch Button. The Voice Library will begin clearing. The amount of time
needed to clear the Voice Library will depend on how much memory has been consumed. You will
see a counter at the top right of the display showing how many seconds are left before the Voice
Library memory is clear.
Deleting LIBRARY. Please wait...
When the message shown above disappears, the Voice Library memory will have been cleared.
HA<O> SKX Owner’s Playing Guide