Lower to Pedal
132
Changing the LOWER TO PEDAL Note Limit
Page 1 of the ZONES Edit Menu allows you to set the highest note that will sound the Lower Manual registration
when the LOWER TO PEDAL Touch Tab is “ON.”
Accessing the ZONES Edit Menu using the Touch Buttons:
1. From the PLAY Screen, touch the MENU/EXIT Touch Button to see the first screen of the MENU
Mode. You will see “A" displayed in the extreme upper left corner of the Information Center
Display.
2. Touch the PAGE UP Touch Button three times. You will now see “D” displayed in the extreme
upper left corner of the Information Center Display. The word, “ZONES” in the upper left corner
of the Information Center Display will be blinking (flashing “on” and “off”).
3. Touch the ENTER Touch Button.
Accessing the ZONES Edit Menu using the Shortcut:
Touch and Hold the LOWER TO PEDAL Touch Button. After approximately 1 second, the Information
Center Display will look like this:
Notice that the legend just underneath the word, “BASS” is blinking.
From the above screen, touch the PAGE RIGHT Touch Button. The Information Center Display should
now look like this:
You can now change the upper note limit of the LOWER TO PEDAL Coupler. You can select from “1C”
(the lowest note on the manual) to “3C” (the third “C” on the manual, which also is Middle “C.”
Turn the VALUE Rotary Control to the right to locate the note range higher.
Turn the VALUE Rotary Control to the left to locate the note range lower.
HA<O> SKX Owner’s Playing Guide
To Next Page
Loading...
Need help?
General
