Drawbars & Percussion
92
PIPE Edit Menu - Page 3
From the previous screen, touch the PAGE RIGHT Touch Button once. Page 3 of the PIPE Edit Menu should now
display. The legend below the word “DIR” (Direction) should now be blinking.
Pipe Voice Pan
This Advanced Feature allows you to simulate different placements of pipe ranks.
Select the directionality you want by doing the following:
Turn the VALUE Rotary Control to the right to move the sound of the selected Pipe Voice left.
Turn the VALUE Rotary Control to the left to move the sound of the selected Pipe Voice right.
NOTE: Setting this parameter to “-C-" will locate the sound in the center.
From the previous screen, touch the PAGE RIGHT Touch Button once. The legend below the word “IMG” (Image)
should now be blinking.
Pipe Voice Imaging
This Advanced Feature allows you to simulate different arrangements of pipes.
What Is “Pipe Imaging?”
The pipes of a pipe organ are arranged into sets called ranks. Each ranks consists of pipes representing a specific sound
on the organ - Open Diapason, Trompette, etc. (In keeping with the different philosophies of organ sound, many organ
stop names are of European origin; hence the use of French, German, Dutch, etc.)
The pipes of each rank are supported by an assembly called a chest. The pipes can be arranged in many different ways
on the chest. The pipe arrangement chosen by the maker depends on several things - aesthetics, musical, etc. - but the
four most common ones are shown on the next page.
HA<O> SKX Owner’s Playing Guide
To Next Page
Loading...
Need help?
General
