Drawbars & Percussion
75
Saving a Custom Tone Wheel
TRY THIS:
1. Access the CUSTOM TONE WHEEL Edit Menu using the procedure described on page 30. You
should now see Page 1 of the CUSTOM TONE WHEEL Edit Menu.
2. Use the VALUE Rotary Control to select the Custom Tone Wheel you want to modify.
SPECIAL NOTE: If you want to create a new Custom Tone Wheel, you can do so by using the VALUE
Rotary Control to scroll past number “4.” If you do this you will see the number “5" and a blank name. In
this way, you can create a Custom Tone Wheel without disturbing any of the preprogrammed Custom
Tone Wheels. If, on the other hand, you want to make changes or modifications to the preset Custom
Tone Wheels, select one of them before proceeding to step 3 below.
3. Make whatever changes you want to the editable parameters - Level, Resonance, etc.
4. After you have made all your edits and you have the sound you want, Touch and Release the RECORD
Touch Button.
The Information Center Display should now look similar to this:
HA<O> SKX Owner’s Playing Guide
To Next Page
Loading...
Need help?
General
