Special Performance Features
273
REVERB Edit Menu - Page 2
From the previous screen, touch the PAGE RIGHT Touch Button repeatedly until Page 2 of the REVERB Edit
Menu displays. The Information Center Display should now look like this:
This Advanced Feature Menu Page contains three (3) parameters that affect different Reverb Types. The first one ,
Reverb Decay, affects the Reverb programs that approximate actual live reverberation (“Room1," “Room2," “Live,”
“Hall1,” “Hall2," “Church,” “Plate” and “Spring,”) while the last two, Delay Time and Delay Feedback, affect the
“Delay,” “PanDly” and RevDly.” programs.
Use the PAGE LEFT and PAGE RIGHT Touch Buttons to move back and forth among these three parameters. The
parameter that is blinking will be the one affected when you turn the VALUE Rotary Control.
Reverb Time
This Advanced Feature increases the decay of the Reverb. You can select from “0" (minimum decay time) to “127"
(maximum decay time.
Turn the VALUE Rotary Control to the right to increase the Decay Time.
Turn the VALUE Rotary Control to the left to decrease the Decay Time.
Delay Time
This Advanced Feature allows you to set the recirculation rate;, i.e., the amount of time that elapses between the
original sound, the first repeat and subsequent repeats. You can select from “4.7ms” (4.7 milliseconds - very short
Delay Time) to “2000ms” (2000 milliseconds - long Delay Time).
Turn the VALUE Rotary Control to the right to increase the Delay Time.
Turn the VALUE Rotary Control to the left to decrease the Delay Time.
NOTE: You can also set the delay time with the foot switch.
Delay Feedback
This Advanced Feature allows you to adjust the number of times the Delay will recirculate. You can select from “0"
(no repetitions) to “96%” (maximum number of repetitions).
Turn the VALUE Rotary Control to the right to increase the Decay Feedback.
Turn the VALUE Rotary Control to the left to decrease the Decay Feedback.
HA<O> SKX Owner’s Playing Guide
To Next Page
Loading...
Need help?
General
