Drawbars & Percussion
39
Finally, here is how to add a Pedal or Bass registration.
TRY THIS:
1. Using the Pedal Drawbars, create a Pedal Drawbar registration - for example, 60. You can confirm the
registration by consulting the Information Center Display.
2. If you do not have a MIDI Pedal Clavier connected to the SKX, touch the MANUAL BASS Touch
Button to transfer the Pedal tones to the Lower Manual.
3. Play some notes on the left end of the manual. You will now hear the notes play with Pedal tones
added.
Ë Please Read
On the SKX, Drawbar parameter changes for the Pedal department (“P”) will not be heard unless the MANUAL BASS
Touch Tab is “ON” or a MIDI Pedal Clavier is connected.
NOTE: You will notice that two (2) Drawbar positions are shown for the Pedals in the Information Center Display.
On most Hammond Organs with two manuals and pedals, there are two Drawbars for controlling the Pedal tones -
one at “16'" pitch and the other at “8'” pitch. The SKX faithfully embodies this feature with two Pedal Drawbars,
which are explained on page 10.
HA<O> SKX Owner’s Playing Guide
To Next Page
Loading...
Need help?
General
