Drawbars & Percussion
81
Drawbar Organ Type - “Pipe”
The “Pipe” Drawbar Organ Type allows you to use the Drawbars to register authentic pipe organ tones.
TRY THIS:
1. If you have not already done so, access the DRAWBAR Edit Menu. The quickest way to do this is to
use the Shortcut shown below:
2. Turn the VALUE Rotary Control until the Information Center Display shows the following:
You may now use the Drawbars to control the voices of a classical pipe organ. The figure below shows how
the Drawbars are allocated in “Pipe” mode.
IMPORTANT NOTE: When “Pipe” mode is activated, the Drawbars will function similar to
drawstops on a traditional pipe organ - pulling a Drawbar “out” will turn the associated Pipe Voice “ON”
while pushing the Drawbar “in” will turn the Pipe Voice “OFF.” The Pipe Voices do not have
gradations of volume - they are either “ON” or “OFF.”
HA<O> SKX Owner’s Playing Guide
To Next Page
Loading...
Need help?
General
