Overdrive & Multi-Effects
232
From the above screen, touch the PAGE RIGHT Touch Button once. The Information Center Display should now
look like this:
The legend underneath the word “RATE” should be blinking.
RATE - Wah-Wah Rate
This Advanced Feature allows you to adjust the rate of the Wah-Wah effect. You can select from “0" (slowest rate)
through “127" (fastest rate).
NOTE: The SOURCE must be set to “LFO” in order for this Advanced Feature to function.
Turn the VALUE Rotary Control to the right to make the rate faster.
Turn the VALUE Rotary Control to the left to make the rate slower.
From the previous screen, touch the PAGE RIGHT Touch Button once. The Information Center Display should
now look like this:
The legend underneath the word “FREQ” should be blinking.
FREQ - Wah-Wah Frequency
This Advanced Feature allows you to adjust the central frequency of the Wah-Wah effect. You can select from “0"
(lowest frequency) through “127" (highest frequency).
Turn the VALUE Rotary Control to the right to increase the frequency.
Turn the VALUE Rotary Control to the left to decrease the frequency.
NOTE: You can also use the EXTRA VOICE EFFECT Rotary Control to adjust this Advanced Feature;
however, the SOURCE must be set to “MAN” in order to do this.
HA<O> SKX Owner’s Playing Guide