MIDI
320
External Zone Page 1 - ON/OFF and Channel Selection
If you followed the instructions on the previous page, you should now see Page 1 of the External Zone Menu. The
word underneath the word “SWITCH” should now be blinking.
External Zone Switch
This Advanced Feature allows you to turn the selected External Zone “ON” (MIDI information will be transmitted)
or “OFF” (no MIDI information will be sent).
Turn the VALUE Rotary Control to make your selection.
From the previous screen, touch the PAGE RIGHT Touch Button once. The Information Center Display should
now look like this:
The number underneath the word “CHANNEL” should be blinking.
External Zone Channel
This Advanced Feature allows you to select the MIDI Channel on which MIDI data from the selected External Zone
will be transmitted. You can select from “1" through “16.”
Turn the VALUE Rotary Control to make your selection.
HA<O> SKX Owner’s Playing Guide
To Next Page
Loading...
Need help?
General
