Hammond SKX Reference Guide

Using the USB Port
358
Installing a Voice Library from a USB Flash Drive to the SKX:
1. If you are not in the LIBRARY Edit Menu, follow the instructions on pages 6 and 7 to display it.
Otherwise, continue reading. The Information Center Display should look similar to this:
If more than one Voice Library is loaded on the USB Drive, the Information Center Display will
show an arrow symbol. Use the PAGE UP and PAGE DOWN Touch Buttons to select the Voice
Library you want to load.
You will also see numbers on the right side of the display followed by the letter “M.” The number
on the top line shows the amount of memory the selected Voice Library will require. The number
on the bottom line shows the amount of available memory in the Sk’s hardware. In this way, you
can determine whether you have enough memory to load each Library.
2. When you have selected the Voice Library you want to download, touch the ENTER Touch Button.
. The bottom line of the Information Center Display will scroll the following:
Loading LIBRARY. Please wait...
After the library has finished loading, the opening screen shown at the bottom of the preceding page
will again display.
Notice that the number on the bottom line has now changed to reflect the amount of available
memory. You can use this number to keep track of how much memory each Library uses.
HA<O> SKX Owner’s Playing Guide

Hammond SKX Specifications

General

Manuals	2
Drawbars	9 per manual
Power Supply	AC Adapter
Effects	Chorus, Vibrato, Reverb
Connectivity	USB, MIDI, Audio Out, Headphones, Expression Pedal
Keyboard	61 keys (waterfall style)
Piano/Ensemble Section	Pianos, Strings, Brass
Display	LCD
Touch Sensitivity	Adjustable