Using the USB Port
357
5. Touch the PAGE RIGHT Touch Button two times. The Information Center Display should now
look like this:
\
The word “LIBRARY” should now be blinking.
5. Touch the ENTER Touch Button once. The Information Center Display should now look similar to
this:
You are now in the LIBRARY Edit Menu. You may now use the PAGE NAVIGATION Touch Buttons in
conjunction with the VALUE Rotary Control to Load, Save or Delete Sound Libraries. These changes are
explained starting below.
NOTE: If the Flash Drive is not formatted, or if there is no Flash Drive inserted, the Information Center
Display will read:
USB is not ready.
If you see this message, you will be prompted to touch the ENTER Touch Button to return to the previous
screen.
HA<O> SKX Owner’s Playing Guide