Drawbars & Percussion
63
Percussion Edit Page 4
From the previous screen, touch the PAGE RIGHT Touch Button repeatedly until Page 4 of the PERCUSSION Edit
Menu displays. The Information Center Display should now look like this:
The letters underneath the word “1'CANC” should now be blinking.
Percussion Drawbar Cancel
When Percussion Drawbar Cancel is turned “ON,” the 8th harmonic Drawbar will be canceled when Percussion is "ON".
This replicates the original Hammond Organs with Touch-Response Percussion Control, such as the B-3, C-3, RT-3 and
A-100 series. When this feature is turned “OFF,” the 8th harmonic Drawbar (1') will continue to sound while Percussion
is "ON". This replicates later Hammond Organs with Percussion.
Turn the VALUE Rotary Control to turn Percussion Drawbar Cancel "ON" or “OFF.”
Percussion Drawbar Level
From the previous screen, touch the PAGE RIGHT Touch Button once. The letters underneath the word “LEVEL”
should now be blinking.
The legend underneath the word “LEVEL” should now be blinking.
This Advanced Feature allows you to set the Drawbar Level when Percussion is “ON” at normal volume (SOFT Touch
Tab “OFF”). When “-3db” is chosen, the Drawbars will be reduced by -3db (-3 decibels) in loudness when Percussion
is "ON" at normal volume. This replicates the original Hammond Organs with Touch-Response Percussion Control.
When “0db” is chosen, the volume of the Drawbars will stay at the same level, or "0db,” when Percussion is "ON" at
normal volume.
Turn the VALUE Rotary Control to select either “-3db” or “0db.”
NOTE: A "decibel" is a unit of measurement for the loudness of a sound wave.
HA<O> SKX Owner’s Playing Guide
To Next Page
Loading...
Need help?
General
