Special Performance Features
282
CONTROL Edit Menu - Page 2 - Expression Parameters
This Advanced Feature Menu allows you to control how a connected Expression Pedal will function.
From the previous screen, touch the PAGE UP Touch Button once, then touch the PAGE LEFT Touch Button four
times. The Information Center Display should now look like this:
The legend underneath the word “SOURCE” should be blinking.
You are now in the portion of the CONTROL Edit Menu which pertains to Expression settings.
Use the PAGE LEFT and PAGE RIGHT Touch Buttons to move forward or backward through the various
parameters.
The following pages will explain how to set the Expression parameters the way you want.
EXPR - Screen 1
Expression Source
This Advanced Feature allows you to select the source of expression control. The data chart below shows the options
you may select.
Expression Source Options
Description Function
PED (NORM) Hammond EXP-50 Expression Pedal or compatible equivalent.
PED (REV) Expression pedal having reversed polarity.
MIDI MIDI Expression Data (controller #11) will be received at the UPPER keyboard
channel.
Turn the VALUE Rotary Control to make your selection.
Expression Monitor (“MON”)
This is not really an Advanced Feature but is merely a way to display the current Expression Value, with “0" being
minimum Expression (no audible sound) and “127" being maximum Expression. The Expression Monitor can be
useful as a troubleshooting aid if you either don’t hear any sound or can’t change the volume using a connected
Expression Pedal.
HA<O> SKX Owner’s Playing Guide
To Next Page
Loading...
Need help?
General
