Patches & Favorites
166
If you followed the instructions on the previous page, Page 1 of the PATCH Edit Menu displays. The Patch Name
on the bottom line should now be blinking.
Patch Name
This Advanced Feature allows you to name or re-name your User Patches.
Use the PAGE LEFT and PAGE RIGHT Select Touch Buttons to move the cursor to select the character to be
edited.
Turn the VALUE Rotary Control to the right to scroll forward through the characters.
Turn the VALUE Rotary Control to the left to scroll backward through the characters.
The available characters include: Punctuation Marks (space - . ‘ &), Numeric Characters (0 ~ 9), Upper-case
Letters (“A ~ Z”), and Lower-case Letters (“a ~ z”).
NOTE: If you touch the PAGE LEFT Touch Button when the cursor is all the way to the left, as in the above
figure, you may see a message such as “USB is not ready” if no USB Flash Drive is inserted. In this case simply
touch the ENTER Touch Button and the Patch Name screen will reappear.
From the previous screen, touch the PAGE UP Touch Button once. The Information Center Display should now
look like this:
PATCH LOAD Menu Pages
The PATCH LOAD Menu Pages allow you to select which components of the instrument will be saved as part of a
Patch. The next few pages will explain this in detail.
Patch Load - Drawbar Registration
This Advanced Feature allows you to select how the Drawbar Registration will be saved to a Patch. You can select
whether you want to save the Upper (“UPP”) Lower (“LOW”) or Pedal “PED”) Drawbae settings.
Use the PAGE LEFT and PAGE RIGHT Touch Buttons to move back and forth among “UPP” “LOW ” and “PED.”
Turn the VALUE Rotary Control to turn the selected function “ON” or “OFF.”
HA<O> SKX Owner’s Playing Guide
To Next Page
Loading...
Need help?
General
