MIDI
330
External Zone Page 6 - Damper ON/OFF
From the previous screen, touch the PAGE RIGHT Touch Button once. Page 6 of the External Zone Edit Menu
should now display.
The word just underneath the word “DAMPER” should now blink.
External Zone Damper
This Advanced Feature allows you to select whether you want to send Damper (Controller #64) information as part
of the selected External Zone.
Turn the VALUE Rotary Control to make your selection.
MIDI All Notes Off and Parameter Reload (“MIDI Panic”)
MIDI plays notes from an external instrument by sending two commands - “Note On” which starts the note playing,
and “Note Off” which releases the note and stops it from playing. These two commands are always sent in pairs.
Once in a while, a Note Off command may not follow a Note On command, causing a note or notes to cipher, or
sound continuously (the phenomenon popularly referred to a “stuck notes”). In this case, you need to send a MIDI
command to the receiving instrument to clear the ciphering notes.
To do this, touch the PAGE UP and PAGE DOWN Touch Buttons simultaneously.
Doing this will send a “MIDI All Notes Off” as well as a “MIDI Reset All Controllers” command to the receiving
instruments. The stuck notes will be turned off and the settings for the External Zones will be reset, then the External
Zone settings will be re-sent. Normal playing can then be resumed.
HA<O> SKX Owner’s Playing Guide
To Next Page
Loading...
Need help?
General
