Overdrive & Multi-Effects
248
From the previous screen, touch the PAGE RIGHT Touch Button once. The Information Center Display should
now look like this:
The legend underneath the word “HPF” should be blinking.
HPF - Chorus High-Pass Filter
Controls the frequency range of the effect. You can select from “0" (the effect is added to all frequencies) to “127.”
(the effect is the effect is added only to the high frequencies). As the value is increased, the effect is added to the
higher frequencies.
Turn the VALUE Rotary Control to the right to narrow the frequency range to the high frequencies only.
Turn the VALUE Rotary Control to the left to broaden the frequency range to include lower frequencies.
From the previous screen, touch the PAGE RIGHT Touch Button once. The Information Center Display should
now look like this:
The legend underneath the word “PH” should be blinking.
PH - Chorus Phase
Selects the type of the chorus effect available: “2” (normal) or “3” (rich) phase effect type.
NOTE: This Advanced Feature is not available for the Drawbars. The Drawbar Chorus Phase is fixed at “2.”
HA<O> SKX Owner’s Playing Guide
To Next Page
Loading...
Need help?
General
