Special Utility Features
344
3.
Now touch the ENTER Touch Button once. The Information Center Display should now look like this:
WARNING!: Doing any of the following procedures will erase all parameters, settings and registrations, returning
the instrument to the original Hammond factory default settings.
Use the PAGE LEFT and PAGE RIGHT Touch Buttons to select which portions of the instrument will be
reset with factory-default settings. The data chart below shows the options you may select.
DEFAULT Options
Description Function
MANUAL Resets the contents of the MANUAL Touch Tab. You can use this feature to create a
“clean slate” for new Patch settings.
PATCH Resets the User Patches. Use the VALUE Rotary Control to select the Patch you want to
initialize. You can select from “U001" to “U100" and “ALL” (all user patches).
GLOBAL Resets the Global Parameters (Master Tune, Foot Switch assignments, etc.)
LESLIE Resets the contents of the internal Leslie Cabinets. Use the VALUE Rotary Control to
select the Leslie Cabinet you want to initialize. You can select from “U1" through“U8" and
“ALL” (all User cabinets).
LIBRARY Deletes all of the Extra Voice Library voices, leaving only the onboard voices.
ALL Resets the entire instrument.
NOTE: You can also perform a DEFAULT ALL by turning the Power “ON” while pressing and holding
the RECORD Touch Button.
After you have made your selection, touch the ENTER Touch Button to reset the instrument to the default
settings you have chosen. If you DO NOT wish to Reset, touch either the PLAY or the MENU/EXIT Touch
Button.
HA<O> SKX Owner’s Playing Guide
To Next Page
Loading...
Need help?
General
