Skx
Owner’s Manual
94
OD / EFF (Overdrive / E ects) - continued
❻ PHASER - RATE
Adjusts the frequency speed. It is linked with the [EFFECT AMOUNT] knob.
e setting range is 0 to 127. e cycle becomes faster as the value increases.
❼ PHASER - DEPTH
Adjusts the depth of modulation.
e setting range is 0 to 127. e modulation becomes deeper as the value increases.
❽ PHASER - RESONANCE
Adjusts the resonance (feed-back) amount.
e setting range is 0 to 127. e resonance becomes greater as the value increases.
At higher values, the sound is modulated beyond normal recognition.
❾ PHASER - MANUAL
Sets the middle frequency of the phase e ect.
e setting range is 0 to 127. e frequency becomes higher as the value increases.
❿ PHASER - MIX
Adjusts the volume balance between the “dry” and the e ect sound.
e setting range is 0 to 127. At 0, only “dry” is heard. e e ect level becomes
greater as the value increases. At 127 the ratio between the “dry” and the e ect
sounds becomes 1:1.
⓫ PHASER - HPF
Controls the frequency range of the e ect.
e setting range is 0 to 127. At 0 the e ect is added to all frequencies. e e ect is
added to the higher frequencies as the value increases.
Frequency
Level
Mix
Depth
Manual
Rate
Modulation
HPF
eect range
Phaser
is creates a sound with a shifting phase, adding a twisting e ect to the sound.
❺
❻
❼
❽
❾
❿
⓫
To Next Page
Loading...
