To Next Page

To Previous Page

GEN7iB

420

TROUBLE-SHOOTING

Thestateremainsat“Coarse”

Category Description

Cause A network switch is causing jitter on the PTP timestamps in the

network.

Solution Increase the PTP Accuracy, see chapter „Checking the Perception

setup“ on page 421.

Recording When starting a recording the mainframes are typically not syn-

chronizedwithinthespeciedaccuracy.Thesamplesatthestartof

the recording are expected to be synchronous within 10 times the

speciedaccuracy,butmaydriftapartastherecordingproceeds

depending on the cause of the problem.

Feedback Typically,anoticationappearsandtherecordingcontainsamarker

to point out the problem.

Questions and Answers:

Need help?

Do you have a question about the HBK GEN7iB GEN Series and is the answer not in the manual?

HBK GEN7iB GEN Series Specifications

General