Display:
Two lines of each 16 characters displaying the status of the system and operating instructions. Normally date
and time are displayed. The back-light is turned-on as soon as a card is read, and automatically turned-off again.
Buzzer:
Used for acoustical indication of alarm/fault. Also activated for a short time to indicate operating fault or to give
an attention signal to the user.
Keyboard:
The keyboard includes the numerical keys 0 to 9 used for code etc. and 6 function keys:
This key is used for setting (if connected to an alarm system).
This key is used for unsetting (if connected to an alarm system).
or This key is used for alarm/fault reset (only in THOR integrated system) and to move the
cursor to the right in all programming menus.
This key selects the displayed menu-function.
This key is used for step back and log-out.
This key steps through the different menus.
To Next Page