By using the
↓
- key the next blocked card no. will be shown. By keying in a card no. the first following blocked
card no. will be shown. When the list is finished it will display the first no. again. By means of the
C
- key, the
display function is stopped and a return to Menu 36 is made.
Menu 37. Show Programming Cards.
When this menu is called the display will ask for the priority of the programming cards to be displayed. The
display will then display the first card no. with a programming priority equal to the no. keyed in. The PRG.PR.
indicates the priority.
The following information can then be displayed by using the
→
- key:
BLK = Card blocked or not.
P.GRP. = Personnel group number connected to the card.
PRI = Programming priority.
MES. = Message no. send to this card for the moment (if any).
Z = Zone no. where the card is registered.
If the Free card format (6 or 14) is being used the card number can be displayed by using the
→
- key (only 95T
readers).
By using the
↓
- key the next programming card no. will be shown. By keying in a card no. the first following no.
with a prg. priority will be shown. When the list is finished it will display the first no. again. By means of the
C
-
key, the display function is stopped and a return to Menu 37 is made.
Menu 38. Show Personnel Groups.
By this menu all cards with the Personnel group no. specified can be displayed.
When this menu is called the display will ask for the personnel group no. of the cards to be displayed. The
display will then display the first card no. with a personnel group no. equal to the no. keyed in. The P.GRP.
indicates the personnel group no. The following information can then be displayed by using the
→
- key:
BLK = Card blocked or not.
P.GRP. = Personnel group number connected to the card.
PRI = Programming priority.
MES. = Message no. send to this card for the moment (if any).
Z = Zone no. where the card is registered.
To Next Page
Loading...