4.12 Submenu 7 - Manual Door Control.
With a Service card (when Service is allowed) or a programming card with the highest priority, it is possible to
overwrite the automatic door control functions.
Menu 71. Block Door.
When the door is permanent blocked, the text DOOR IS BLOCKED will be presented in the display as a fault
message to anyone who tries to perform a normal door passage.
Menu 72. Open Door Permanent.
When the door is permanent open, the text DOOR IS OPEN will be presented in the display as a fault message
to anyone who tries to perform a normal door passage.
Menu 73. Normal Door Control.
After using the menus 71 or 72 it is necessary to use the menu 73 to come back to the normal door control.
To Next Page
Loading...