Operating Precautions
5
Before using the instrument the first time, verify that it operates normally to
ensure that the no damage occurred during storage or shipping. If you find any
damage, contact your dealer or Hioki representative.
Before Use
Before using the instrument, make sure that the insulation on the test
leads is undamaged and that no bare conductors are improperly exposed.
Using the instrument in such conditions could cause an electric shock, so
contact your dealer or Hioki representative for replacements. (Model 9615
H.V.Test Lead)
Handling the Instrument
• To avoid electric shock, do not remove the instrument's case. The inter-
nal components of the instrument carry high voltages and may become
very hot during operation.
• To avoid damage to the instrument, protect it from physical shock when
transporting and handling. Be especially careful to avoid physical shock
from dropping.
Handling the test leads
• For safety reasons, when taking measurements, only use the 9615 H.V. Test
Lead provided with the instrument.
• To avoid breaking the test leads, do not bend or pull them.
Safety Precautions during Testing
To prevent electric shock, when the DANGER lamp is lit or during the test,
never touch the voltage output terminals, test lead, or the tested object.
Tested object
To Next Page
Loading...
