9.4 Message Reference
181
99
All the response format display items other than the elapsed time are identical to
the VFD format (without a space).
Test-voltage value, Measured voltage value (withstand-voltage mode, unit: kV)
.
Three digits (in NR2 format)
Test-voltage value (insulation-resistance mode, unit: V)
Three or four digits (in NR1 format)
Measured voltage value (insulation-resistance mode, unit: V)
One, two, three or four digits (in NR1 format)
Upper-limit test value, Lower-limit test value (withstand-voltage mode, unit: mA)
.
.
Two or three digits (in NR2 format)
Upper-limit test value, Lower-limit test value (insulation-resistance mode, unit: MΩ)
.
.
.
.
Three or four digits (in NR1 or NR2 format)
Measured current value (withstand-voltage mode, unit: mA)
.
.
.
.
Two, three or four digits (in NR2 format)
Measured resistance value (insulation-resistance mode, unit: MΩ)
.
.
.
.
Three or four digits (in NR1 or NR2 format)
Test time setting value (withstand-voltage mode and insulation-resistance mode, unit: s)
Ramp timer time setting value (withstand-voltage mode, unit: s)
Delay time setting value (insulation-resistance mode, unit: s)
.
.
Two or three digits (in NR1 or NR2 format)
Each time elapsed (withstand-voltage mode and insulation-resistance mode, unit: s)
.
.
.
Two, three or four digits (in NR2 format)
9.4.3 Transmission and response formats
To Next Page
Loading...
