Hioki 3174 - Initialization Items; Local Function

9.3 Communication Methods
137
99
*1: Only the MAV bit (bit 4) is cleared.
*2: All bits except the MAV bit are cleared.
*3: Except the PON bit (bit 7).
During communications, “RMT” is lit to indicate the remote control state.
To cancel the Remote state
9.3.5 Initialization Items
●: initialized/ ×: not initialized
Initialization method
Item
Power on
∗RST
command
Device
clear
∗CLS
command
Device specific functions
(ranges etc.)
× ● ××
Output queue ● × ● ×
Input buffer ● × ● ×
Status byte register
● ×
×
*1
●
*2
Event register
●
*3
××●
Enable register ● ×××
Headers on/off ●● ××
9.3.6 Local Function
The “RMT” LED goes out.
+
Remote state cannot be cancelled when the GP-IB command Local Lock Out is
set.