5.4 Displaying the Test Result
76
Test is successful when lights up.
will light up for about 0.3 seconds before returning to READY mode.
A PASS will be shown when both the withstanding and insulation-resistance
tests pass upon completion of the tests.
If the ramp-down time is set, the reduction timer starts counting down the ramp-
down time. Upon expiration of the time, the measurement result upon completion
of the test is displayed, and the instrument changes to the PASS state. In the
PASS state, is lit.
5.4.1 "PASS" Determination
To hold the display
See "6.2.1 PASS Hold" (p. 85)
To Next Page
Loading...
