9.4 Message Reference
148
9.4.2 Device-Specific Commands
Sets and queries Event Status Enable Register 0 (ESER0)
Syntax
(Command)
:ESE0 <0 to 255 (NR1)>
Sets the mask pattern in Event Status Enable Register 0 (ESER0) for
the Event Status Register. The value is initialized to 0 at power-on.
(Query)
:ESE0?
Queries the mask pattern in Event Status Enable Register 0 (ESER0)
for the Event Status Register.
(Response)
<0 to 255 (NR1)>
Error
Execution error appears when setting is carried out in a format different from the
NR1 numeric value format.
1286432168421
bit 7bit 6bit 5bit 4bit 3bit 2bit 1bit 0
unused unused unused unused EOM LFAIL UFAIL PASS
Query and Clear Event Status Register 0
Syntax
(Query)
:ESR0?
Returns the event status register 0 (ESR0) setting and then clears
that content.
(Response)
<0 to 255 (NR1)>
Example
(Query)
:ESR0?
(Response)
4
Bit 2 of ESR0 is 1.
Error
Execution error appears when setting is carried out in a format different from the
NR1 numeric value format.
To Next Page
Loading...
