Hioki 3174 - Page 155

9.4 Message Reference
149
99
Enables/disables and queries headers
Syntax
(Command)
:HEADer <ON/ OFF>
Sets whether or not the instrument will prefix headers to its response
messages.
(Query)
:HEADer?
Queries whether or not the instrument will prefix headers to its
response messages.
(Response)
<ON/ OFF>
Example
(Command)
:HEADer ON
Headers are prefixed to response messages.
(Query)
:HEADer?
(Response)
ON
A header is set to be added to response messages.
Note
• Execution error appears when setting other than ON/OFF is set.
• If the PC interface settings are changed by setting optional functions when the
power is turned ON, the header will be reset to OFF.
Query of RS-232C Communication Error
Syntax
(Query)
:SYStem:ERRor?
Returns the RS-232C communication error register content and then
clears that content.
(Response)
<0 to 3 (NR1)>
Example
(Query)
:SYStem:ERRor?
(Response)
2
A time out error has occurred.
128643216 8 4 2 1
bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0
unused unused unused unused unused unused Time out
error
Overrun error
Framing error