Hioki 3174 - Appendix2 List of Optional Functions

Appendix2 List of Optional Functions
A5
Appendix
Index
Setting the optional functions allows testing under various conditions. To set an
optional function, select the number assigned to the function (except for output-
voltage setting).
Setting optional functions
Appendix2 List of Optional Functions
1.
( is lit)
Make sure the lamp is lit on the screen.
* will not be displayed during the Double Action setting.
2.
Press the STOP key while holding down the SHIFT key to display the
optional screen (page 1).
3.
Press the key to move the flashing cursor to the position of required
function.
To set pages 2 to 3, move the flashing cursor to the position of the page
number, and change the page with the / keys.
4.
Select a setting with the / keys.
5.
Press the STOP key while holding down the SHIFT key to complete the
setting value.
The instrument reverts to the READY state.
To continue to the setting for the next item, press the key.
SHIFT
STOP
+
Page No.
Output-voltage
restricting value
<Ex.> Select FAIL hold
or
<Ex.> Select No FAIL hold.
SHIFT
STOP
+