Hioki 3174 - Confirming Package Contents; Appendix1 Remote Control Box; Contens; Introduction

Introduction
1
Thank you for purchasing the HIOKI “Model 3174, 3174-01 AC Automatic Insula-
tion/Withstanding HiTester.” To obtain maximum performance from the instru-
ment, please read this manual first, and keep it handy for future reference.
• When you receive the instrument, inspect it carefully to ensure that no dam-
age occurred during shipping. In particular, check the accessories, panel
switches, and connectors. If damage is evident, or if it fails to operate accord-
ing to the specifications, contact your dealer or Hioki representative.
• When transporting the instrument, use the original packing materials in which
it was shipped, and pack in a double carton. Damage occurring during trans-
portation is not covered by warranty.
* The 3174-01 AC Automatic Insulation/Withstanding HiTester can be used with
GP-IB.
Options  9613 Remote Control Box (Single)
 9614 Remote Control Box (Dual)
 9615 H.V.Test Lead
 9616 Warning Lamp
 9267 Safety Test Data Management Software
 9637 RS-232C Cable (1.8 m, 9-pin to 9-pin)
 9638 RS-232C Cable (1.8 m, 9-pin to 25-pin)
 9151-02 GP-IB Connector Cable (2 m)
 9151-04 GP-IB Connector Cable (4 m)
Introduction
Confirming Package Contents
Model 3174 (-01) AC Automatic Insula-
tion/Withstanding HiTester
.......................................................... 1
Model 9615 H.V.Test Lead
.......................... (HIGH/ LOW, 1 each)
Power Cord....................................... 1 Slip Prevention Plate .........................1
Instruction Manual.......................... 1