Hioki 3174 - 5.4 Displaying the Test Result

69
8
9
付録
索引
10
11
5
In the continuous test, withstand-voltage and insulation-resistance
tests are conducted successively. Read "Chapter 3 Withstand-
Voltage Test" (p. 29) and "Chapter 4 Insulation- Resistance Test"
(p. 47), and set the test conditions.
Automatic Test Chapter 5
W → I
Set each test condition
Select the test mode
Withstand-voltage test"3.1 Setting the Test-Conditions" (p. 31)
insulation-resistance test"4.1 Setting the Test Conditions" (p. 49)
Starting a test
START
Displaying the test result
Press the START key to start a test. (p. 71)
PASS
Test result (p. 73)
I → W
Withstand-voltage test
↓
Insulation-resistance test
Insulation-resistance test
↓
Withstand-voltage test