Hioki 3174 - Page 4

Contents
ii
3.1.4 Setting the Ramp-up (Ramp-down) Time Timer ...........35
3.1.5 Setting the Test-Frequency ..........................................36
3.1.6 Setting the Initial voltage for ramp-up ...........................37
3.1.7 Setting the Confirmation Voltage
used for upper and lower-limits for Contact Check .......38
3.2 Starting a Test ........................................................... 40
3.3 Terminate the Test .................................................... 42
3.4 Displaying the Test Result ......................................... 44
3.4.1 "PASS" Determination ..................................................45
3.4.2 "FAIL" Determination ....................................................46
Chapter 4
Insulation-Resistance Test_____________________47
4.1 Setting the Test Conditions ....................................... 49
4.1.1 Setting the Test-Voltage Value .....................................50
4.1.2 Setting the Upper (Lower) Limit Value ..........................51
4.1.3 Setting the Test Time Timer .........................................53
4.1.4 Setting the Delay Time .................................................54
4.1.5 Setting the Confirmation Voltage
used for upper and lower-limits for Contact Check .......55
4.2 Starting a Test ........................................................... 57
4.3 Terminate the Test .................................................... 59
4.4 Displaying the Test Result ......................................... 61
4.4.1 "PASS" Determination ..................................................62
4.4.2 "FAIL" Determination ....................................................63
4.4.3 Influence of capacity on the test result (reference data) 65
Chapter 5
Automatic Test ______________________________69
5.1 Setting the Test Conditions ....................................... 70
5.2 Starting a Test ........................................................... 71
5.3 Terminate the Test .................................................... 73
5.4 Displaying the Test Result ......................................... 75
5.4.1 "PASS" Determination ..................................................76
5.4.2 "FAIL" Determination ....................................................78
Chapter 6
Useful Functions_____________________________79
6.1 Functions for carrying out the tests safely ................. 79
6.1.1 Key-lock Function .........................................................79